Table of Contents
Advertisement
Chapter 4
Viewing and Updating the Software Image
1 Tue Nov 25 19:34:08 2003 19228160 TopspinOS-2.0.0/build211
1 Tue Nov 25 19:32:16 2003 15539200 TopspinOS-2.0.0/build212
SFS-3012R#
Interpret the display as follows:
a.
b.
c.
Viewing the Software Image Version with the Element Manager GUI
Use the Element Manager GUI to view the software version(s) on the chassis as follows:
Launch Element Manager.
Step 1
View the software version of the controller:
Step 2
a.
Figure 4-1
b.
OL-11187-01
Identify files that have been installed and the files that have been downloaded but not installed:
A .img file is an image file that is not installed.
–
An installed image file has a slash (/) in the name.
–
Determine if the version of any uninstalled (.img) file is the version that you need to install. If it is,
then you do not need to download it again.
Determine whether any uninstalled file is obsolete. An obsolete file is a candidate for deletion.
Select Maintenance > System Info to view the version of software installed on the controller, as
shown in
Figure
4-1.
Viewing the Software Image Version of the Controller Module
Note the software image version identified in the Description field and compare it with the most
recent version available on the CCO website or your FTP site. Consider updating to the newer
version, if one is available.
Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide
Viewing the Software Image Version
4-3
Advertisement
Table of Contents
