Pg Compucall Session Configuration; Table 3: Dms-100 Pg Label Format; Table 4: Compucall Session Parameters - Cisco NORTEL SL-100 Supplement Manual

20 Unified ICM Configuration

2.7. PG CompuCALL Session Configuration

20

Table 3: DMS-100 PG Label Format

Label Format Example
DnnnHnnn D9136243685H333
DN 9136245686
This section describes how the PG must be configured through the Setup
program to logon DMS-100 PG on DMS-100 Switch as a host application.

Table 4: CompuCALL Session Parameters

Session
Parameter
ApplicationID
BusinessGroupID
NetworkNodeID
Password
ServiceID
ServiceVersion
Meaning
DialedDigits for
redirectDestination is 9136245686.
HostcallData is 333.
DialedDigits for
redirectDestination is 9136245686.
HostcallData is of null content.
Example Description
1 Integer that identifies the software as
the application that is initiating the
logon request
6 Integer that identifies your company.
Your Interexchange Carrier defines
this ID
40 Integer identifier that specifies the
switch that the software will use to
communicate. This is the switch the
host computer connects to via the
CompuCALL link. Your Interexchange
Carrier defines this ID
BLAZER Is provided by the system
administrator for security purposes.
The password corresponds to the
BusinessGroupID
1 Integer that identifies the application
context to be set for the session (i.e., a
service profile containing Application
Service Options or subsets, as defined
by your Interexchange Carrier)
10 for Integer that specifies the application
SCAI10 level or the signaling version that the
host application is using