Replacing Damaged Drain Fitting - Hussmann IMPACT LW Installation And Operation Manual

6-6 SERVICE
REPLACING DAMAGED
DRAIN FITTING
The following procedure is for the field repair of
a broken drain fitting.
1. Use a drill with a 1
to drill out the bottom of the drain fitting. Be
sure to drill completely through fitting and
bottom liner.
Drain Fitting
Viewed from Inside Merchandiser
P/N 0395730F
7 -in. (48 mm) hole saw
/
8
2. Apply teflon tape to threaded end of adapter
and screw into threaded end of tee.
3. Apply an ABS and PVC compatible primer
and sealer to adapter and inside of drain.
Insert adapter into drain fitting.
Foam Bottom
Assembly
Modified
Drain Fitting
PVC Adapter
1
1 / x 1
2
(38 x 32 mm)
(obtained at local
building supply store)
End Section View
HUSSMANN CORPORATION, BRIDGETON, MO 63044-2483 U.S.A.
1
Tee 1 /
4 in.
TxSxS
(32 mm)
1
/
4 inch