Reinstalling Wire Racks, Pans, And Interior Panels - Hussmann IMPACT LW Installation And Operation Manual

5-4 MAINTENANCE
REINSTALLING WIRE RACKS,
PANS, AND INTERIOR PANELS
With the honeycomb assembly removed, all
interior wire racks, drip pans, and shelf support
panels may be lifted out without tools.
The wire rack telescopes to allow tilted displays
or removal of the rack. Ensure full insertion of
rack supports into front and rear panels before
loading.
Wire Rack
P/N 0395730F
Drip pans overlap when properly installed. Note
corner tabs at each end section.
Front and rear internal panels rest on fillister
screws. Do not pry at edges of panels. If panels
do not lift easily, insert a screwdriver into a rack
support hole and lightly tap the screwdriver to
raise the panel.
Reinstall in reverse order.
Snap off
corner tabs
Internal Panel
HUSSMANN CORPORATION, BRIDGETON, MO 63044-2483 U.S.A.
Snap off
corner tabs