Advertisement
Available languages
Available languages
INSTALLATION
CART ASSEMBLY INSTRUCTIONS
IMPORTANT:
Read all instructions before you begin. Do not jump ahead or skip any step.
CAUTION:
Some parts have sharp edges; care must be taken when handling the various components to
avoid injury. Please read safety information provided in these instructions before beginning
assembly. Wear gloves when handling.
Two or more people should work together to assemble the cart and All-Grill, Double Side Burner/
Sink, or Double Side Burner/Griddle.
NOTE: Avoid using side shelf to move cart. Push or pull cart by grasping corners of head.
LOCATING THE CART
For proper use, this product should be installed/positioned on a flat ground or patio. Unevenness such as
bumps, cracks and protrusions should be 1/4" or less. Refer to Fig. 02 for required flat area dimensions.
GETTING STARTED
Remove packaging.
n
Contents Included:
Your cart is packaged in one box. The box contains your cart and a universal
hardware kit to be used for grill installation and may contain extra hardware for
your convenience.
Table of quantity of parts
Contents
30" Cart shown
24.128"
Contents
26.6"
Phillip screws
19.08"
2.497"
Bracket, Tab
Model
Part No.
CAD1-30
CAD1-36
CAD1-48
CAD1-30 CAD1-36 CAD1-48
Machined
13
10-24X1/2"
2
Bolt Hex
2
1/4-20-1/2"
Washer
4
.313 x .750
Nut Hex
2
1/4-20
Qty.
71131
1
71132
1
71133
1
16
17
2
4
2
2
4
4
2
2
4
TOP VIEW (with drawers open)
CAD 36 = 914 mm
CAD 48 = 1219 mm
Fig. 02
Tools Required:
Power Screwdriver or
Variable Speed Drill
with Phillips - tip #2
1219 mm
Eye Goggles
Work Gloves
Attachment
5/32" Allen Wrench
3/16" Allen Wrench
3/32" Allen Wrench
Advertisement
