Slide Drip Tray/Pan Back Into Place - Fisher & Paykel 71131 Installation Instructions And User Manual

INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)
13. Attach the sink drain hose to the bottom of the sink (use one tailpiece washer)
(Fig. 54 and 55).
14. Push the sink drain hose up and over the edge of the side panel (Fig. 56). This
will prevent the interference between this hose and the top rack. It also cre-
ates proper drainage from the sink to the water tank. And/or use the cable tie
provided to hold the hose up (Fig. 57).
15. Slide drip tray/pan back into place and reinstall parts removed in #9A.
16. Attach cold water hose (not supplied) to the unit and test the
system for leaks.
A. Close the ball valve behind the cart
B. Turn on the faucet
C. Check all connections inside and outside the cart.
D. If you notice any leaks, turn the water supply off. Tighten
connections that are leaking and retest.
Fig. 55
17
Fig. 54
Fig. 56
Cable tie
Fig. 57