FUEL INJECTION SYSTEM
ISC (IDLE SPEED CONTROL) UNIT
TIP
Do not remove the ISC (idle speed control) unit
completely from the throttle body.
1. Inspect:
• ISC (idle speed control) unit
Inspection steps:
• Disconnect the ISC (idle speed control) unit
coupler from the ISC (idle speed control) unit.
• Connect the analog pocket tester (pocket
tester) (Ω × 10) to the terminals of the ISC
(idle speed control) unit.
Positive tester probe → Red/Green
Negative tester probe → White/Green
Positive tester probe → Brown/Blue
Negative tester probe → Pink/Blue
Analog pocket tester:
Pocket tester:
• Measure the ISC (idle speed control) unit
resistance.
Out of specification → Replace the throttle
body.
ISC (idle speed control) unit
resistance:
110
FI
YU-03112-C
90890-03112
57 ~ 63 Ω