Infiniband Port Status Leds; Switch Status Leds - Cisco M SFS7000E Installation Note

InfiniBand Port Status LEDs

A port status LED indicator (green) exists next to each IB port on the
Cisco M SFS7000E InfiniBand Switch, as shown in
indicators. The eight ports on the IB switch module are numbered next to each LED indicator.
Table 2
LED State
On (solid)
Blinking
Off

Switch Status LEDs

Each IB switch module includes two LEDs (one green and one bi-color, blue and amber), as shown in
Figure
Cisco M SFS7000E InfiniBand Switch and are controlled by the Dell Remote Access
Controller/Modular Chassis (DRAC/MC) management board. The DRAC/MC checks whether or not the
switch blade is valid and has correct identifiers.
indicator.
Table 3
LED States
On
Off
Table 4
LED States
Blue off
Blue blinking
Blue solid on
Amber blinking
Amber solid on
External Network Management Requirements
You can manage the Cisco M SFS7000E InfiniBand Switch in an InfiniBand network by using the Cisco
High-Performance Subnet Manager or the Cisco Embedded Subnet Manager.
78-18371-01
InfiniBand Port Status LED Indicators
Indicators
Logical link exists
Traffic active
Link error or Subnet Manager is not running
11. The power LED and the system status LED provide the overall system status for the
Table 4 describes the bi-colored system status LED indicator.
Switch Status Power LED Indicator
Indicators
Power is on
Power is off
System Status LED Indicator
Indicators
Switch is not ready
Identify
Switch is on and operating normally
Indicates fault
Indicates fault
Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis
External Network Management Requirements
Figure 11. Table 2 describes IB port status LED
Table 3 describes the green-colored power LED
15