Cisco M SFS7000E Installation Note page 13

Connecting InfiniBand Cables
To remove a cable with a pull connector, grasp the connector with one hand and push it toward the port,
and then pull the latch away from the port with your other hand while gently wiggling the connector
away from the port, as shown in Figure 10.
Figure 10 Removing Cable with a Pull Connector
Hold here
Pull here
Hold here
The Cisco M SFS7000E InfiniBand Switch also supports optical connections through external
Note
pluggable optical modules.
Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis
13
78-18371-01