Cisco M SFS7000E Installation Note page 12

Connecting InfiniBand Cables
Figure 8
If the free space around a given IB port is tight, verify that your IB cable connector engages completely.
Note
Wiggle the connector back and forth to be sure that both sides of the connector have locked firmly into
place.
To remove a cable with a pinch connector, pinch both sides of the back of the connector, as shown in
Figure
Figure 9
Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis
12
InfiniBand Cable with Pull Connector
9, and pull the connector away from the port.
Removing Cable with a Pinch Connector
Press here
Press here
78-18371-01