Daylight Saving Time (Advanced, 937C Df Combo And 937C Combo Models Only); Position Format (Advanced, 937C Df Combo And 937C Combo Models Only); Time Format (Advanced, 937C Df Combo And 937C Combo Models, International Only); Date Format (Advanced, 937C Df Combo And 937C Combo Models, International Only) - Humminbird 931C Installation And Operation Manual

93x_Man_531370-1_A - vs4.qxd 2/18/2005
DAYLIGHT SAVING TIME
(Advanced, with 937c DF Combo and 937c Combo models only)
Daylight Saving Time adjusts the time display to account for local Daylight Saving
Time. Selecting On adds one hour to the time display adjusted for your local time
zone. Selecting Off leaves the time display as adjusted for your local time zone. This
menu choice is available only when in Advanced User Mode (see Setup Menu Tab:
User Mode.)
To change the Daylight Saving Time setting:
1. Make sure you are in Advanced User Mode, then highlight Daylight Saving Time
on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time
On or Off. (Off, On, Default = Off)
POSITION FORMAT
(Advanced, with 937c DF Combo and 937c Combo models only)
Position Format selects the format of the latitude and longitude position display.
This menu choice is available only when in Advanced User Mode (see Setup Menu
Tab: User Mode.)
To change the Position Format setting:
1. Make sure you are in Advanced User Mode, then highlight Position Format on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.
(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
11:12 AM Page 80
Time Format changes the time format used by the unit This menu choice is available
only when in Advanced User Mode (see Setup Menu Tab: User Mode.) International
models only. Time Format selects a 12 hour or 24 hour format for the time of day
displayed when Time + Date is selected as a Digital Readout on the Sonar View (see
Select Readouts).
To change the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time Format on the
Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format.
(12 hour, 24 hour, Default = 12 hour)
Date Format changes the date format used by the unit This menu choice is available
only when in Advanced User Mode (see Setup Menu Tab: User Mode.) International
models only. Date Format selects the format for the date display when Time + Date is
selected as a Digital Readout on the Sonar View. (see Select Readouts).
To change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date Format on the
Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format.
(mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
75
TIME FORMAT
(Advanced)
(937c DF Combo and 937c Combo Models, International Only)
DATE FORMAT
(Advanced)
(937c DF Combo and 937c Combo Models, International Only)