Bosch IXO Original Instructions Manual page 31

Clockwise: To drive in screws, press the rotational direction switch (6) all
the way to the left.
Anti-clockwise: To loosen or unscrew screws, press the rotational direction
switch (6) all the way to the right.
Switching on/off
To start the power tool, press and hold the on/off switch (5).
The worklight (3) lights up when the On/Off switch (5) is lightly or fully
pressed, allowing the work area to be illuminated in poor lighting conditions.
To switch off the power tool, release the on/off switch (5).
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder, are locked when the on/off
switch (5) is not pressed.
This allows screws to be driven in even when the battery is discharged and
enables the power tool to be used as a screwdriver.
If the drill spindle is blocked, do not press the on/off switch (5) for
u
longer than 15 seconds. Otherwise, the power tool may become dam-
aged.
Practical advice
Only apply the power tool to the screw/nut when the tool is switched
u
off. Rotating tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
To ensure safe and efficient operation, always keep the power tool
u
and the ventilation slots clean.
If the battery is no longer working, please contact an authorised after-sales
service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be re-
placed, this must be done by Bosch or by an after-sales service centre that
is authorised to repair Bosch power tools.
Bosch Power Tools
English | 31
1 609 92A 6RC | (02.05.2022)