Fisher & Paykel OR90L7 Installation Manual/User Manual page 50

Care and cleaning
48
Replacing the halogen oven lamp
Important!
Disconnect the cooker from the power supply before continuing.
Let the oven cavity and the heating elements cool down.
Remove the protective cover (A).
Replace the halogen bulb (B) with a new one suitable for high temperatures (300°C) with the
specifications: 220-240V, G9, and with the same wattage as the bulb being replaced (check
wattage stamped on the bulb).
Important!
Never replace the halogen bulb with bare hands. Contamination from your fingers can cause premature
failure. Always use a clean cloth or gloves.
Refit the protective cover.
Turn the power to the cooker back on and set the clock.
Note: Oven bulb replacement is not covered by your warranty.
WRONG
CORRECT
B
B
A
A
Fig.40 Removing either oven lamp