How To Use - Hamilton Beach 840243700 Operation Manual

How to Use

BEFORE FIRST USE: After unpacking the blender, follow the
instructions in "Care and cleaning." If your blender has a glass
jar, first insert the cutting blade assembly through the bottom
of the blender jar; then attach the collar and twist until secure.
There is no assembly necessary if your blender has a plastic jar;
simply wash and then use.
IMPORTANT: Your blender jar and cutting blade assembly are
subject to wear during normal use. Always inspect jar for nicks,
chips, or cracks. Always inspect cutting blade assembly for
broken, cracked, or loose blades. If jar or cutting blade assembly
is damaged, do not use. Call our toll-free customer service
number to obtain replacement parts.
1. Make sure blender is unplugged. Place blender base on
clean, dry surface to keep foreign particles from being pulled
up into motor during operation.
2. Set jar into place on blender base, making sure it is securely
seated.
3. Put ingredients in jar and place lid on jar.
4. Plug cord into outlet.
5. Before processing food or beverages, ensure that blender lid
is secured onto jar and jar is secured onto blender base.
Select a LO or HI power button; then push desired speed
button. Blender speed increases as buttons are pushed left
to right. When using the Pulse buttons, the blender will only
run when the button is held down.
Always place one hand on blender lid during operation.
840243700 ENv04.indd 6 840243700 ENv04.indd 6
6
3/27/14 5:43 PM 3/27/14 5:43 PM