Hamilton Beach 59762, 59765, 59760, 59765C - Hand Blender Manual

Also See for 59762:

Table of Contents

Parts and features

NOTE: The maximum power rating is based on the blade attachment. The whisk attachment and chopper may draw significantly less power.

On select models

Optional Accessories

Cut Hazard. Always inspect attachments before each use. Do not use cracked, bent, or damaged attachments.

The hand blender is not designed for use over a heat source.
This appliance is not intended to chop ice. Add ice to beverageafter blending.
Do not immerse the motor housing past the top metal portion ofeach blending attachment.

Place food in a tall, deep container for blending. For best results, solid foods should be no larger than 1-inch (2.5-cm) chunks.
Attach blending or whisk attachment to motor housing. Hold hand blender upright and turn motor housing clockwise to tighten and counterclockwise to loosen while holding the attachment.
Plug into outlet.
Grasp unit in hand. Push speed control button. Slowly move the attachment up, down, and sideways through the food.
Do not immerse the motor housing past the top metal portion of each blending attachment.
Unplug from outlet when not in use.

Optional accessory on select models

Place chopping blade into bowl, ensuring blade is seated securely. Put food into chopper bowl and place the motor housing on top, lining up the plastic notches. Twist clockwise to locked position.
Choose desired chopping speed (I or II) and process until food has reached desired consistency. Running the chopper continuously will yield smoother food consistency, while pulsing will yield chunkier results.
The rubber lid/base may also be used as a nonskid base under the chopper while in use.
Remove motor housing from chopper and food from chopping bowl. Unplug from outlet when finished.

To use the hand blender in a saucepan, be sure to remove the panfrom the stove.
To puree foods, liquid is needed. Add cooking liquid, broth, juice, milk, or cream until desired consistency is reached.
For thorough blending, move hand blender up and down in mixtureuntil smooth.
To achieve best blending results, use deep, tall containers.
For easy cleanup, unplug hand blender and rinse attachmentsunder running water immediately after using.
The plastic lid of the measuring jar may be flipped upside downand placed underneath the base of the jar in order to provide a more stable surface while blending.

Unplug unit from outlet.
Remove attachment from motor housing. Wash attachment in hot, soapy water. Rinse; then dry. Blending attachments may also be placed in the top rack of the dishwasher.

Electric Shock Hazard. Never hold motorhousing portion of hand blender under running water. Simply wipe clean with a damp cloth.