Table of Contents
Advertisement
How to Use
6. CAUTION: When blending hot liquids, remove filler-cap of
two-piece lid and close any lid openings along the edge
intended for pouring. Hot liquids may push lid off jar during
blending. To prevent possible burns: Do not fill blender jar
beyond the 3-cup (710-ml) level. With the protection of an
oven mitt or thick towel, place one hand on top of lid. Keep
exposed skin away from lid. Start blending at lowest speed.
7. ALWAYS turn blender off and wait until blades have stopped
rotating before removing jar.
8. To remove jar after blending is complete, lift jar straight up.
9. NEVER replace jar onto unit while motor is running.
840243700 ENv04.indd 7
840243700 ENv04.indd 7
(cont.)
7
3/27/14 5:43 PM
3/27/14 5:43 PM
Advertisement
Table of Contents
