Pyrolytic (On Some Models Only) - Smeg SF7302TX Manual

We recommend removing the door in
order to make the manual cleaning of
the parts that are difficult to reach
easier.

Pyrolytic (on some models only)

See General safety instructions.
Pyrolytic cleaning is an automatic high-
temperature cleaning procedure which
causes dirt to dissolve. This process
makes it possible to clean the inside of
the oven very easily.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following the
usual cleaning instructions.
• Remove any food residues or large spills
from previous cooking operations from the
inside of the oven.
• Completely remove all accessories from
inside the oven.
• For very stubborn encrustations spray an
oven cleaning product onto the glass (read
the warnings on the product); leave for 60
minutes, then rinse and dry the glass using
kitchen roll or a microfibre cloth.
• If present, remove the temperature probe.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. After entering the special functions menu,
press the button until the
function is selected.
2. Press the button to confirm.
The display shows the Pyrolytic function duration
56 - CLEANING AND MAINTENANCE
(factory set to 2:30 hours).
3. Turn the temperature knob to set the
duration of the Pyrolytic cycle from a
minimum of 2:30 hours to maximum of 3:30
hours.
Recommended pyrolytic cycle duration:
• Light dirt: 2:30
• Medium dirt: 3:00
• Heavy dirt: 3:30
4. Press the button to confirm.
It is not possible to start the pyrolytic
cycle if the temperature probe (if
available) is plugged in.
5. Two minutes after the Pyrolytic cycle starts,
the indicator light comes on to indicate
that the door is locked by a device that
prevents the door from being opened.
It is not possible to select any function
once the door lock device has been
activated.
At the end,
and a beep is activated.
6. Turn the function knob to position 0 to exit
the function.
The door is locked until the temperature
inside the oven cavity returns to a safe
level.
is displayed and flashes
91477A535/B