Mounting Options - ADTRAN NetVanta 1000 Series Hardware Installation Manual

NetVanta 1000 Series Switch Hardware Installation Guide

Mounting Options

If you have purchased the VPN Accelerator Card, install it first (see Installing the
NetVanta VPN Accelerator Card (1202368L1) on page 40).
The unit may be installed in a rackmount, wallmount, or tabletop configuration. The following sections
provide step-by-step instructions for rackmounting and wallmounting.
Rack Mounting the NetVanta
The NetVanta is a 1-U high, rack-mountable unit which can be installed into a19-inch equipment rack. The
following steps guide you in mounting the NetVanta into a rack.
Step
1 To allow proper grounding, scrape the paint from the rack around the mounting holes where the
NetVanta will be positioned.
2 Position the NetVanta in a stationary equipment rack. This unit takes up 1 U of space.
3 Have someone else hold the unit in position as you install two mounting bolts through the unit's
brackets and into the equipment rack using a #2 Phillips-head screwdriver.
4 Apply power to the unit (see Supplying Power to the Unit on page 37).
Be careful not to upset the stability of the equipment mounting rack when installing this
product.
61200500L1-34C
Instructions for Rack Mounting the NetVanta
© 2004 ADTRAN, Inc.
Action
Unit Installation
35