Advertisement
CD-MPX100E
[3] TEST MODE
• Setting the test mode
Any one of test mode can be set by pressing several key as follows.
<X-BASS> + <CD> + <ON/STAND-BY> TEST: CD operation test.
<<MEMORY>>
key input.
Adjustment result
automatically will
display as below.
for each 2 sec :
a) "FOFF_XX"
b) "TOFF_XX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
explanation:
a) Focus off set
b) Tracking off set
c) Tracking balance
d) Tracking Gain
f) Focus Gain
g) RF level shift
VOL Ñ Last memory
BAL Ñ CENTER
P.GEQ Ñ FLAT
X-BASS Ñ OFF
To cancel : Power OFF
Function: -CD test mode.
C D
<<PLAY>> key input.
Do TOC IL. Do normal play.
When these following key is input
into PLAY key, track number can
be appoint directly.
<<
<<
<<
= "FOFF_XX"
= "TOFF_XX"
= "TBAL_XX"
<<STOP>> key input.
= "TGAN_XX"
= "FGAN_XX"
= "RFLS_XX"
-Enter test mode.
T E S T
OPEN/CLOSE operation is using manual.
<<
>>, <<
>> buttons make pick's slide possible.
1 >> key: Track 4
2>> key: Track 9
3>> key: Track 15
STOP
2 – 2
<<MEMORY>> key input.
Laser ON.
<<MEMORY>> key input.
Tracking OFF play at that
specific point.
<<MEMORY>> key input.
Tracking ON play from
that specific point.
<<MEMORY>> key input.
Adjustment result automatically will
display as below for each 2 sec :
a) "FOFF_XX"
b) "TOFF_XX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
<<STOP>> key input.
STOP
Sliding the PICKUP with
<<
>>, <<
>> button
must only be in STOP mode.
IL isn't done
Advertisement
Chapters
