2. CD MECHANISM SECTION
Perform steps 1, 2, 3, 10, 11 and 13 of the disassembly method to
remove the CD mechanism.
2.1. How to remove the loading motor. (See Fig. 1)
1. Bend the hooks (A1) x 5 pcs., to remove the loading motor.
Loading
Tray
Figure 1
2.2. Remove the pickup. (See Fig. 2)
1. Remove the stop washer (B1) x 1 pc., to remove the gear (B2) x 1
pc.
2. Remove the screws (B3) x 2 pcs., to remove the shaft (B4) x 1 pc.
3. Remove the pickup.
NOTE: After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from elec-
trostatic damage.
Stop Washer
(B3)x2
(B1)x1
φ2.6x6mm
Shaft
Gear
(B4)x1
(B2)x1
Figure 2
Loading
Loading
Motor PWB
Motor
(A1)x5
Pickup
Unit
CD Mechanism
3 – 5
CD-MPX100E