Default Etherchannel Configuration - Cisco Catalyst 2950 Software Manual

Chapter 10 Configuring the Switch Ports
Figure 10-3

Default EtherChannel Configuration

Table 10-2
Table 10-2 Default EtherChannel Configuration
Feature
Channel groups
PAgP mode
PAgP learn method
PAgP priority
Load balancing
78-11380-03
Load Distribution and Forwarding Methods
Catalyst 2950 switch
with source-based
forwarding enabled
EtherChannel
Cisco router
with destination-based
forwarding enabled
shows the default EtherChannel configuration.
Default Setting
None assigned.
No default.
Aggregate-port learning on all interfaces.
128 on all interfaces. (Changing this value on
Catalyst 2950 switches has no effect.)
Load distribution on the switch is based on the
source-MAC address of the incoming packet.
Catalyst 2950 Desktop Switch Software Configuration Guide
Understanding the EtherChannel
10-13