Topology View Popup Menus; Link Popup Menu - Cisco Catalyst 2950 Software Manual

Menus and Toolbar

Topology View Popup Menus

These popup menus are available in the Topology view.

Link Popup Menu

You can display reports and graphs for a specific link displayed in the Topology view
display the link popup menu, click the link icon, and right-click.
Table 2-14 Link Popup Menu
Popup Menu Option Task
Link Report Display the link report for two connected devices. If one device is an unknown device or a candidate,
only the cluster member side of the link displays.
Link Graph Display a graph showing the bandwidth used by the selected link.
Properties Display information about the device and port on either end of the link and the state of the link.
The Link Report and Link Graph options are not available if at both ends of the link are
•
•
•
If multiple links are configured between two devices, when you click the link icon and right-click, the
Multilink Content window appears
display the link popup menu specific for that link.
Figure 2-10 Multilink Decomposer Window
Catalyst 2950 Desktop Switch Software Configuration Guide
2-22
Candidate switches
Catalyst 1900 and Catalyst 2820 switches
Devices that are not eligible to join the cluster
(Figure 2-10). Click the link icon in this window, and right-click to
Chapter 2 Getting Started with CMS
(Table 2-14). To
78-11380-03