Cisco Catalyst 2950 Software Manual page 91

Chapter 4 General Switch Administration
Table 4-2 Default Settings and Where To Change Them (continued)
Feature
Performance
Configuring a port
Duplex mode
Speed on 10/100 ports
Gigabit Ethernet Flow
Flooding Control
Storm control
Flooding unknown unicast
and multicast packets
IGMP Snooping
Multicast VLAN
Registration (MVR)
Network Redundancy
Hot Standby Router
Protocol
Spanning Tree Protocol
Unidirectional link
detection
Port grouping
QoS and Security
Access Control Lists
3
(ACLs)
78-11380-03
Default
Setting Concepts and CLI Procedures
None Chapter 10, "Configuring the Switch Ports."
Auto "Changing the Port Speed and Duplex Mode"
section on page
Auto "Changing the Port Speed and Duplex Mode"
section on page
"Configuring Flooding Controls" section on
page 10-4.
Disabled "Configuring Flooding Controls" section on
page 10-4.
Enabled "Configuring Protected Ports" section on
page 10-5.
Enabled "Understanding and Configuring IGMP
Snooping" section on page
"Enabling or Disabling IGMP Snooping"
section on page
"Immediate-Leave Processing" section on
page 11-3.
"CLI: Configuring a Multicast Router Port"
section on page
Disabled "Understanding Multicast VLAN
Registration" section on page
Disabled "Creating a Cluster Standby Group" section
on page 5-20.
Enabled "Configuring Basic STP Features" section on
page 9-20.
"Configuring Advanced STP Features"
section on page
Disabled "Configuring UniDirectional Link Detection"
section on page
None "Understanding the EtherChannel" section on
assigned page 10-8.
None "Guidelines for Configuring ACLs on the
assigned Catalyst 2950 Switches" section on page
"Creating Standard and Extended IP ACLs"
section on page
10-1.
10-1.
11-1.
11-2.
11-7.
11-7.
9-30.
10-18.
12-5.
12-7.
Catalyst 2950 Desktop Switch Software Configuration Guide
Default Settings
CMS Option
Port > Port Settings
Port > Port Settings
Port > Port Settings
Port > Port Settings
Port > Flooding Control
Port > Flooding Control
Device > IGMP Snooping
–
Cluster > Standby Command
Switches
Device > Spanning Tree
Protocol (STP)
–
Port > EtherChannels
Device > ACLs
4-9