Advanced Settings - Parker Airtek Magnum MSC4000 User Manual

MSC4000 - MSC15000 USER MANUAL

Advanced Settings

Note: Changing these settings may negatively affect the performance of the dryer or disable key monitoring func-
tions. Be certain you understand the potential effects before changing these settings.
High Ambient/Water Temperature Alarm (M) – Touch to adjust the High Ambient or Water Temperature Alarm
threshold
Enable Oil Level Monitoring Alarm (M) – Touch to disable/enable the oil level monitoring system alarm
Enable Oil Recovery Management Function (M) – Touch to disable/enable the oil recovery function. This function
will periodically output the compressor at 100% to ensure that there is enough oil getting back to the compressor
under low load conditions.
Pressure Units (M) – Select units for pressure values used for all displays and logs.
Temperature Units (M) – Select units for temperature values used for all displays and logs.
The following are only included on dryers with more than one compressor:
Compressor Auto-Switch Time (M) – Touch to adjust the auto switch time for cycling the compressor. This ensures
that all compressors will be placed online at least once per 24 hours, thereby reducing balancing the wear across all
compressors.
Enable Compressor #1 through #4 (M) – Touch to disable/enable each compressor. This allows a compressor to
be taken offline for service.
M
Supervisor level access required
18