Controls/User Interface; Main Display; User Controls - Parker Airtek Magnum MSC4000 User Manual

MSC4000 - MSC15000 USER MANUAL
4. Controls / User Interface
4
6
5
8

4.1 Main Display

User Controls

1. Menu Icon – Touch to display the menu icons on the sides of the display.
2. Snapshot Icon – Touch to save a snapshot of any screen to the flash drive.
3. Help Icon – Touch to display online help screens where available.
4. Run / Stop Keys
Run Key – Touch to start dryer if key is green.
Stop Key – Touch to stop dryer if key is red.
5. Mode Select Keys (Not included on dryers with variable drive or single mode dryers)
Auto-Mode Select – Touch to toggle auto select mode
Load/Unload Mode – Touch to switch to Load/Unload Mode
Cycling Mode – Touch to switch to Cycling Mode
6. Alarm Keys (M)
Alarm Reset Key – Touch to reset all active alarms.
Alarm Silence Key – Touch to silence the alarm screen and turn off the alarm relay.
7. Drain Test Key – Touch to test the drain valves.
8. Log In / Log Out Keys – Touch to log in and log out as required.
Supervisor default password is SUP (all caps)
The password may be changed by any person logging into the dryer. If the password is lost, however, the display
panel must be completely reprogrammed by a service representative.
M Supervisor level access required
12
1
7
2
3