Table of Contents
Advertisement
GUI Function
5.3
Register Map
In the low-level configuration, users can change the register bits by directly clicking the bit value. If the
immediate update mode is selected, the register value is updated immediately when the value is changed.
If manual update mode is selected, the register value is not updated unless the Write Selected or Write
Modified button is clicked.
Users can save the register configuration by clicking the Saving Configuration button. When opening the
configuration file, all of the saved registers value are reloaded into the device.
12
TLC6C5712-Q1 Evaluation Module
Figure 10. Register Map
Copyright © 2015, Texas Instruments Incorporated
SLVUAE6A – January 2015 – Revised July 2015
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
