-
Removing the Grille Unit (Fig.2 and Fig.3)
Use a pair of tweezers or something like that. Insert
the tips into the bottom panel slits and slide the rail
in the direction indicated by an arrow in Fig.2 until
the grille moves down to the bottom.(Fig.2)
Remove the screw. (Fig.3)
Remove the screw. (Fig.3)
Remove the screw. (Fig.3)
Note: In the other side, remove the fixing three
screws in the same manner as above. Then, you
can remove the Grille Unit.
-
Removing the Heat Sink (Fig.4)
Remove the two screws.
Remove the two screws.
Remove the two screws and then remove
the Heat Sink.
FH-P6600R,P6600
Slit
Fig.2
Heat Sink
Fig.3
Fig.4
89