Product Features - Dell S2722QC User Manual

Product features

The Dell S2722QC monitor has an active matrix, Thin-Film Transistor (TFT), Liquid
Crystal Display (LCD) and LED backlight. The monitor features include:
• 68.47 cm (26.95 in.) viewable area (measured diagonally).
• 3840 x 2160 (16:9) resolution, plus full-screen support for lower resolutions.
• Supports AMD FreeSync™, with a refresh rate of 60 Hz and a rapid response
time of 4 ms gray to gray in Extreme mode*.
• Color gamut of 99% sRGB.
• Digital connectivity with USB Type-C and HDMI.
• Use a USB Type-C cable to provide power (up to 65 W) to a compatible
notebook while receiving video and data signal.
• Tilt, swivel, pivot, and height adjustment capabilities.
• Dual built-in speakers.
• Removable stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Equipped with one USB Type-C upstream port (USB 3.2 Gen 1, 5 Gbps), one
SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A downstream charging port,
and one SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A downstream port.
• Plug-and-play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Supports Picture by Picture (PBP) and Picture in Picture (PIP) Select mode.
NOTE: When PIP/PBP is activated, AMD FreeSync™ (in AMD Radeon™
software) is disabled.
│
8 About your monitor
USB Type-C to USB Type-C
3.2 Gen 2 cable (cable
length: 1.00 M)
• Quick Setup Guide
• Safety, Environmental,
and Regulatory
Information