Setting Up The Monitor; Setting Up The Stand - Dell S2722QC User Manual

Setting up the monitor

Setting up the stand

NOTE: The stand is not factory-installed.
NOTE: The following steps are specifically for setting up the stand that
is shipped with your monitor.If you are attaching a stand that you
purchased from any other source, follow the setup instructions that
were included with the stand.
To set up the monitor stand:
1. Remove the stand base and stand riser from the packaging cushion.
2. Align and place the stand riser on the stand base.
3. Open the screw handle at the bottom of the stand base and turn it clockwise
to secure the stand assembly.
4. Close the screw handle.
│
28 Setting up the monitor