Dell S2722QC User Manual page 40

Input Source
USB-C
HDMI 1
HDMI 2
Auto Select
Auto Select for
USB-C
Reset Input
Source
│
40 Operating the monitor
Selects between the different video signals that may
be connected to your monitor.
Select the USB-C input when you are using the USB
Type-C connector. Press the
the selection.
Select the HDMI 1 or HDMI 2 input when you are
using the HDMI connector. Press the
confirm the selection.
Automatically scans for available input sources.
Allows you to set Auto Select for USB-C to:
• Prompt for Multiple Inputs: Always displays
the "Switch to USB-C Video Input" message
for you to choose whether to switch or not.
• Yes: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No: Never automatically switches to USB-C video
input when the USB Type-C cable is connected.
NOTE: Press the
The option is available only when Auto Select is on.
Resets your monitor input settings to the factory
settings.
button to confirm
button to confirm the selection.
button to