Connecting Your Monitor; Connecting The Usb Type-C And Power Cables - Dell S2722QC User Manual

Connecting your monitor

WARNING: Before you begin any of the procedures in this section,
follow the Safety
NOTE: Dell monitors are designed to work optimally with Dell-supplied
inbox cables. Dell does not guarantee the video quality and performance
if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The
appearance of the computer may vary.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the USB Type-C cable (shipped with your monitor) or the HDMI
cable from your monitor to the computer. (See
3. Connect the USB 3.2 Gen 1 peripherals to the USB 3.2 Gen 1 downstream
ports on the monitor.

Connecting the USB Type-C and power cables

NOTE: Use the USB Type-C cable shipped with monitor only.
• This port supports DisplayPort Alternate Mode (DP1.4 standard only).
• The USB Type-C power delivery compliant port (PD Version 3.0) delivers up
to 65 W of power.
• If your notebook requires more than 65 W to operate and the battery is
drained, it may not be powered up or charged with the USB PD port of this
monitor.
instructions.
Bottom view
Setting up the monitor
for details.)
│
31