Adjusting Temperature In A Refrigerator Compartment; Cooling Food Quickly (Quick Cooling) - Hitachi R-SF48GH Manual

Adjusting temperature in a refrigerator compartment

1
Push button to set the temperature
as you like.
Each time you Push the button, the corresponding indicator lamp
changes in the order shown below:
The temperature is set to "■■" before shipping.
Notice
● Select "■■" in ordinary usage. The temperature may change
depending on the operation states.
● If you adjust the temperature more finely.
● The temperature of the Vacuum Compartment also changes if
selecting "■■■" or "■" .
● Temperature of the door pocket is slightly higher than the one in
the figure on the above.
● If cooling is not enough during summer, select "■■■" .
● When you use "■■■" for a long time during winter, food may
be frozen. If the inside is too cool, use "■■" or "■" .

Cooling food Quickly (Quick Cooling)

Place the foods in the Quick Cooling Corner.
1
The food cools more quickly if it is placed at the center part near the interior wall.
Caution
● Place canned beverages and foods with a high water content apart from the cold air
blowout port.
Otherwise they may be frozen or burst.
2
Touch
" Fridge " indicator lamp is turned on during the " Fridge " operation. The [ " eco " operation indicator
lamp] is not turned on.
The operation will end automatically in about 50 minutes and " Fridge "
indicator lamp will turn off.
button to turn off " Fridge " indicator lamp.
Push
Notice
● More power is consumed during the " Fridge " operation than during the normal operation.
Pg.56
button to turn on " Fridge " indicator lamp.
Push it
About 2 〜 6˚C About 1 〜 3˚C lower
than "■■"
(Factory setting)
※ The above temperatures are standard values under the
condition that the refrigerator is stable with no food stored and
the doors closed, at ambient temperatures of approximately
30ºC, whereas the setting is "■■" for both refrigerating
chamber and freezing chamber.
Quick Cooling
corner
Push it Push it
About 1 〜 3˚C
higher than "■■"
Push it
45