Drive Setup; Boot Computer - IBM Ultrastar 18ZX Installation Manual

IBM storage products
Step 9: Drive Setup
If you have just added a SCSI controller card, follow the manufacturer's instructions to install the card.

Boot Computer

Insert a bootable diskette and "boot up" (turn on) your computer. You should see the drive model appear
on the screen when the system is booting.
Note: This example uses the Adaptec 3950U2 controller and the Model DRVS-09D drive.
Adaptec AHA-3950U2B SCSI BIOS v2.10.0
(c) 1998 Adaptec.Inc. All Rights Reserved.
Press <Ctrl> <A> for SCSISelect (TM) Utility
Ch A. SCSI ID: 0 IBM
At this time, you can press <crtl> <a> to enter the Adaptec SCSI setup utility. Following is the first
screen that will appear.
IBM Hard Disk Drive Technical Support Center
DRVS09D ULTRA2-LVD
Page 12
version 1.0