Jumper Settings; Mounting - IBM Ultrastar 18ZX Installation Manual

IBM storage products

Jumper settings

Step 4: Mounting
After setting the jumpers, mount the hard drive in your system. The Ultrastar drive can be mounted with
any of its six surfaces facing down (right side up, upside down, sideways, etc.). See below for mounting
hole locations. Be sure to treat the disk drive very carefully and gently.
Mounting hole locations
IBM Hard Disk Drive Technical Support Center
60 + 0.2
Page 10
(6X) 6-32UNC- 2B X 4 MAX
28.5 + 0.5
101.6 + 0.2
146.75 + 0.25
version 1.0