Hard Disk Drive Handling Guide - IBM Ultrastar 18ZX Installation Manual

IBM storage products
Before you begin installation, please read the following important disk drive handling
caution:

HARD DISK DRIVE HANDLING GUIDE

These notes are designed to provide a simple overview of the need to be cautious when handling a disk
drive.
Disk drives can be easily damaged either by electrical static shock or by rough handling. In order to
minimize the risk of damage it is essential that disk drives be handled on a cushioned surface (which is
electrostatically safe). Many such static safe mats are available, examples are 3M's 8210 table mat or
3M's "First Touch" computer pad. Great care should be taken when handling disk drives. Do not bump
them against any object. When attaching brackets or mounting the drive in the computer, be very
careful. It is VERY EASY to introduce shocks which exceed the specification.
Please note that the capacity of each disk drive to withstand electrical or mechanical shock varies
depending on its design. The IBM Hard Disk Drive Technical Support Center can advise you on the
suitability of your Deskstar drive for a specific application.
Damage incurred to a drive might not be immediately evident and may cause it to fail months later.
Page 5
IBM Hard Disk Drive Technical Support Center version 1.0