Using The Usb Charger - Tronic TWLD 30 A1 Operating Instructions Manual

Using the USB charger

ATTENTION! Make sure that the power consumption
of your device is not higher than 2.4 A when you are
using the USB Type-A socket 1. If you are using the USB
Type-C socket 2, make sure that the power consumption
of your device is not higher than 3 A. The total power
consumption of all of the devices connected to the two
USB sockets 1/2 may not exceed 5.4 A. Refer to the
operating instructions of your device for more information.
The maximum power output of the USB charger is 5.4 A.
The maximum power output of the USB Type-A socket 1
is 2.4 A. The maximum power output of the USB Type-C
socket 2 is 3 A.
Note: If your mobile device is equipped with USB Power
Delivery 3.0 (PD), you can use a USB-C to USB-C cable
(not included) to connect the USB-C input of your device
to the USB Type-C socket 2 of the USB charger for faster
charging. Charging starts automatically as soon as the
connection is made.
│ GB │ IE
■ 10
TWLD 30 A1