Installation/Removal Procedure; Mezzanine Card - NEC Express5800 Series User Manual

9-6
Upgrading Your Tape Blade

INSTALLATION/REMOVAL PROCEDURE

Install or remove the devices in the following procedure.

Mezzanine Card

The Tape Blade can contain two mezzanine cards for blade. To install a mezzanine card, use the
mezzanine card slot installed on the CPU unit.
IMPORTANT:
The mezzanine card is extremely sensitive to static electricity. Make
sure to touch the metal frame of the Tape Blade to discharge static
electricity from your body before handling the mezzanine card. Do
not touch the terminals and parts on the mezzanine card by a bare
hand and place the cards directly on the desk. For static notes, see
the section "Anti-static Measures" described earlier.
A combination of boards that can be installed in the Blade Enclosure
is under certain restrictions. Contact your service representative for
details.
NOTE:
boards. Refer to the manual provided with the board to check whether
the expansion ROMs should be expanded. Use the BIOS setup utility
"SETUP" for the setting. See Chapter 4 for details.
Mezzanine slot (Type I)
Mezzanine slot (Type II)
Some optional mezzanine cards use expansion ROMs on the