General Description; Scope Of Delivery; Overview; Functional Description - Parkside PAEXS 20-Li B2 Translation Of The Original Instructions

charged using chargers from the Parkside
X 20 V TEAM series.

General description

An illustration of the most
important functional compo-
nents can be found on the
fold-out page.

Scope of delivery

Unpack the device and check for
completeness:
- Cordless orbital sander
- Dust collection box
- Additional handle incl. screw and wing
nut (pre-mounted)
- Adapter for external dust extraction
- Sanding sheet (grain size 60, 80, 120,
240)
- Sanding sheet fixer
- Instruction manual
The Battery and charger are not
included in delivery.

Overview

1 On/Off switch
2 Rotational speed selection wheel
3 Additional handle
4 Wing nut
4a Screw
5 Sanding disc
6 Connection for dust extraction
7 Rechargeable battery
7a Release button
7b Button for charge level indicator
8 Charger
9 Sanding sheet fixer
10 Dust collection box
10a Filter bag
11 Sanding sheet
12 Adapter for dust extraction
13 Handle unit
14 Phillips screw

Functional description

The orbital sander has a rotating sanding
disc for processing wood, metal or paint.
Please refer to the descriptions below for
information on how the operating elements
work.

Technical data

Cordless orbital
sander .................... PAEXS 20-Li B2
Nominal voltage U ...................... 20 V
Idle speed n .............3000 - 12000 min
0
Idle vibration frequency
n ........................... 6000 - 24000 rpm
0
Weight (without battery)...approx. 1.25 kg
Sanding disc .......................... ø 125 mm
Protection type ................................. IPX0
Sound power level
(L ) ................... 76,4 dB(A); K
pA
Sound power level
(L ) ................. 87,4 dB(A); K
WA
Vibration (a
) .......14,4 m/s
h
Battery ........................................... Li-Ion
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
The specified total vibration values and the
stated noise emission values have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specified total vibration values and the
stated specified noise emission values can
also be used for a provisional assessment
of the load.
GB IE
-1
= 3 dB
pA
= 3 dB
WA
2 ; K= 1.5 m/s 2
5