Table of Contents
Advertisement
The following table shows the valid environmental conditions for the device.
● Mechanical environmental conditions
● Climatic environmental conditions
The following values are derived for the significant environmental conditions from the
standards stated.
Environmental condition
Temperature
Atmospheric pressure
Humidity, relative
Vibration
IEC 60068-2-6
Clock frequency of the
frequency inverter
Operation with additional protective measures
You must take additional measures to operate the HMI device at the following locations:
● At locations with a high degree of ionizing radiation
● At locations with harsher operating conditions, for example due to:
● In systems that require special monitoring, for example:
Carrier controller
Operating Instructions, 09/2013, A5E03474162-02
Standard
IEC 60721-3-3:1994
Stationary operation refers to operation in combination with the rail system. The rail system
1
must be designed to prevent the transmission of any impermissible impact to the carrier
controller.
Standard
IEC 60721-3-3:1994
– Corrosive vapors, gases, oils or chemicals
– Electrical or magnetic fields of high intensity
– Elevators
– Systems in especially hazardous rooms
Title
Classification of environmental conditions – part 3:
Classes of environmental disturbances and their limits,
section 3: Stationary operation
Class 3M3 applies.
Title
Classification of environmental conditions – part 3:
Classes of environmental disturbances and their limits,
section 3: Stationary operation, weatherproof
Class 3K3 applies.
Value
0 to 45 °C
1140 to 795 hPa
10 ... 90 %
5 to 9 Hz: 3.5 mm
9 to 500 Hz: 9.8 m/s
≤ 12 kHz
Technical specifications
7.8 Environmental conditions
, weatherproof
1
Comment
Applies to installation according to
chapter "Mounting location and free
space for the carrier control (Page 17)"
Corresponds to an altitude of –1000 to
2000 m
No condensation
Sinusoidal
2
–
Release
01.12.1994
Release
01.12.1994
53
Advertisement
Table of Contents
