Safety - Mazda MAZ-95-130-KT Operation Manual

EVAP/LOW PRESSURE
FOLLOW ONLY MAZDA APPROVED LEAK TESTING PROCEDURES
The procedures in this section are intended to be basic guidelines for users to practice using the
Mazda Dual Purpose Diagnostic Leak Detector (EVAP / Low Pressure mode).
This operation manual is not intended to be used in place of common sense:
• Use this equipment in the manner specified by the manufacturer
• Understand operating procedures
• Follow all safety precautions
!
SAFETY PRECAUTIONS
• All diagnostic work should be performed with the engine off
• Do not leave a vehicle unattended while equipment is connected or operating
• Equipment operates on a AC Voltage
• Do not perform tests near a source of spark of ignition
• When working with the fuel system, work in a well-ventilated area
• Always wear the appropriate safety protection. Wear OSHA standard eye wear and protective
gloves when using this equipment
TURBO/HIGH PRESSURE
FOLLOW ONLY MAZDA APPROVED LEAK TESTING PROCEDURES
The procedures in this section are intended to be basic guidelines for users to practice using the
Mazda Dual Purpose Diagnostic Leak Detector (TURBO / High Pressure mode).
The Mazda Dual Purpose Leak Detector is designed to be used in conjunction with the supplied Power
Intake Adaptors or Fixed Diameter Inlet Adaptors only to test the intake and exhaust systems of turbo
™
boosted engines.
! DO NOT USE TURBO / HIGH PRESSURE IN EVAP SYSTEM
SAFETY PRECAUTIONS
!
• All diagnostic work should be performed with the engine off
• For use only by professional technicians
• Ensure that the vehicle is secure and stable
• Exercise caution when connecting and disconnecting compressed shop air supply
• Do not leave a vehicle unattended while equipment is operating
• Always wear proper safety protection
• This safety guide is not intended to take the place of common sense and good judgment
6
EN

SAFETY

SAFETY