Accessories - Mazda MAZ-95-130-KT Operation Manual

Dual purpose diagnostic leak detector
Table of Contents

Advertisement

Available languages

Available languages

INCLUDED ACCESSORIES
TURBO / HIGH PRESSURE
1. Accessory Storage Case [ 91-0006 ]
Used to store the accessories when not in use
2. Exhaust Cone Assembly [ 96-0004 ]
For use to seal openings from 1 in. (2.5 cm) to 3.4 in. (8.6 cm) to
introduce vapor into exhaust and induction systems (EVAP)
3. Cap Plug Kit Assembly [ 96-0007 ]
Seals openings for low pressure system testing
4. Halogen Inspection Light [ 96-0011 ]
12V DC with 20 ft. (6.1 m) cable. Always use to pinpoint leaks
5. AC Power Cable [ 20-0010 ] for Standard US Outlet
6. Two bottles of OE Approved Smoke Producing Fluid [ 96-0039 ]
8 fl. oz. (237 ml)
Vapor Producing Fluid will perform 100's of typical tests per bottle
Important: Contains NO Dye / Contaminants
7. Hex Key [ 80-0009 ]
To remove / replace fluid fill plug
8. Two Power INTAKE
Inflatable block off bladder with a vapor pass-through
9. Power INTAKE
Adaptor 1.9 in. (7.4 cm) [ 95-0086 ]
Inflatable block off bladder with a vapor pass-through
10. Two Block Off Coupler [ 96-0084 ]
Used in conjunction with the Power INTAKE
being entered from an alternate location.
11. Easy INTAKE ™ [ 95-0082 / B]
Award-winning Easy INTAKE
pressurized vapor pass-through that allows technicians to test
an entire intake or exhaust system quickly and easily.
12. Cooling System Adapter [ 96-0086 ]
Use this adapter to test an empty cooling system following an engine
repair to test for cooling system leaks.
13. Six Gas Cap EVAP Hose Adaptor* [ 96-0128 ]
The EVAP hose adaptors will convert your existing gas tank adaptors
from your previously required tool, to be used on this tool.
14. Universal Filler Neck Connector [ 95-0011 ]
This universal Fuel Filler Neck Connector system fits 100% of vehicles to
simplify EVAP testing.
15. Gas Cap Single Thread [ 96-0092 ]
To be used to block off the bladders if you are testing from intake then
blocking exhaust to simulate boost pressure.
16. EVAP Service Tool Kit [ 96-0003 ]
Schrader Valve Removal Tool
Evap Service Port Adaptor
4
EN
Adaptors, 1.5 in. (4.8 cm) 2x [ 95-0080 ]
Adapters when vapor is
is an inflatable block off bladder with a
1
1
2
3
4
6
8
9
11
12
13
15
16
5
7
10
14

Advertisement

Table of Contents
loading

Table of Contents