Asko TD85 C38X Series User Manual page 36

Cleaning and maintenance
Cleaning the heat pump filter
INFORMATION!
Do not touch the inner metal parts of the heat exchanger with bare hands. Danger of injury on
sharp parts. Use appropriate protection gloves when cleaning the heat exchanger.
INFORMATION!
Incorrect cleaning of the metal fins of the heat exchanger can permanently damage the tumble
dryer. Do not press on the metal fins with hard objects like for example the plastic tube of a
vacuum cleaner.
36
1
During cleaning, some water may be spilled. It is
therefore recommended to place an absorbent
cloth on the floor. Open the outer cover.
2
Hold the levers on the inside cover and rotate
them upwards. Remove the inside cover.
3
Use the handle to pull out the heat pump filter.
4
Pull the foam part of the heat pump filter from the
housing. Wash it under running water and dry it
before replacing it in the filter housing.
The filter may be washed in the washing machine,
with the rinse program on low spin speed. Dry
the filter before replacing it in the filter housing.
INFORMATION!
Clean the foam filter at least after every 30
drying cycles or if necessary.