Asko TD85 C38X Series User Manual page 28

Drying process, step by step
* Max. kg dry load
INFORMATION!
If your laundry is not dried to the desired dryness level, use a more suitable programme.
STEP 5: Choosing the program settings
Using the program settings, the drying programs can be further adjusted to your wishes. See chapter:
SETTINGS.
Only appliance owner/distributor may change the settings!
Some program settings may not be available for your selected program.
Delay Start
In the submenu of the selected program, you can set the start delay when you want the drying
program to start after a certain time (from 1 hour to 100 hours, from the time you press the Start /
Pause button). The estimated time until the end of drying will be displayed.
Use the program selector knob to set from 1 h to 100 hours in 1-hour steps.
Press the button under the selected time/duration to confirm the setting.
Press the Startbutton to start. When the countdown reaches zero, the selected drying program will
start automatically.
To cancel the start delay, press the button Cancel.
Then press the Start button to start the program.
During the countdown to the delayed start, the display will switch off after 5 minutes.
Use the program selector knob or press any button, to reactivate it. The countdown to the start of
the drying cycle will be displayed.
Display will switch on 1 minute before the start of the drying cycle.
After the countdown, drying time will be indicated on the display unit.
28