Installation And Operating Instructions; Location - Hoshizaki KM-470AJE-R452 Instruction Manual

Modular crescent cuber
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
II. Installation and Operating Instructions
• The appliance must be installed in accordance with applicable national, state, and
local codes and regulations.
• Failure to install, operate, and maintain the appliance in accordance with this manual
will adversely affect safety, performance, component life, and warranty coverage and
may result in costly water damage.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after installation. Make sure that none have fallen into the dispenser
unit/ice storage bin.
A. Location
• The icemaker is not intended for outdoor use. Normal operating ambient temperature
must be within 7°C to 38°C; Normal operating water temperature must be within 7°C
to 32°C. Operation of the icemaker, for extended periods, outside of these normal
temperature ranges may affect icemaker performance.
• The icemaker will not work at sub-freezing temperatures. To prevent damage to the
water supply line, drain the icemaker if the air temperature is going to go below 0°C.
See "IV. Preparing the Appliance for Periods of Non-Use".
• The icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• This icemaker allows 30cm clearance at rear, sides, and top for proper air circulation and ease
of maintenance and/or service should they be required.
• The location should provide a firm and level foundation for the appliance.
WARNING
CAUTION
6
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents