When the Functions button, configured as an Alarm button, is pressed
•
connections currently established for the base are ended
•
incoming calls are rejected
•
the handset plays the alarm melody over the speaker (if configured)
•
an alarm call is made to the number specified
Sound profiles
The telephone has sound profiles for adapting the handset to the environmental conditions:
Profile Loud, Profile Silent, Profile Personal. You can use the Do not disturb profile to prevent
the handset signalling an incoming call.
Press the Profile key
Switch between profiles using key
or
select a profile
Set the microphone sensitivity to loud surroundings:
Press and hold the profile key
Profile "Do not disturb"
Set with the profile key
or
Audio Settings
•
The idle display shows "Do not disturb" active. The status bar shows
•
Incoming calls are not signalled but show up in the call list as missed calls.
•
Most messages are blocked. Exceptions: Appointments, alarm clock and anniversaries.
An incoming call occupies a line even if it is not signalled. If all the lines on the base are
occupied, calls cannot be made.
If a call arrives while you are using the telephone, the handset can return to idle status
(depends on the base).
. . . The profile currently set is shown
OK
OK
Availability and operation of the functions
may differ on your telephone.
Do Not Disturb
Change (
Sound profiles
= On)
37