Table of Contents
Advertisement
(2) By reversing the procedures described in "9.4 Side-Positioning Conveyor (Cleaning/
Replacing the Shock Absorber-Attached Guide Plates)," reinstall the shock absorber-
attached guide plates A through H and the cleaning roller assembly.
CHECKS
• Make sure that the right and left rubber roller assemblies are not installed incorrectly.
• Make sure that the anti-static members are brought into contact with the rollers.
• Verify that there is no gap between the cleaning roller assembly and the right and left
side plates of the side-positioning conveyor.
009-058-02
009-058-00
08.30.2001 FM3142
10.20.2000 FM2732 (2)
CR-IR347 Service Manual
Side plate
Guide plate
Cleaning roller
assembly
[Check]
PM - 74
FRONT
FR7H6930.EPS
PM - 74
Advertisement
Table of Contents
