Siemens FUJI-Reader Service Manual page 10

B
9.4 Side-Positioning Conveyor (Cleaning/Replacing the Shock
Absorber-Attached Guide Plates)
9.5 Side-Positioning Conveyor (Cleaning the Rubber Rollers)
9.6 Subscanning Unit (Removing the Light-Collecting Guide
Assemblies)
9.7 Subscanning Unit (Cleaning the Light-Collecting Guide
Assemblies)
9.8 Subscanning Unit (Removing the Scanning Optics Unit)
9.9 Subscanning Unit (Cleaning the Light-Collecting Mirror)
9.10 Subscanning Unit (Cleaning the Rubber Rollers)
9.11 Subscanning Unit (Cleaning the Shock Absorber-Attached
Center Guide Plate/Shock Absorber-Attached Guide Plate)
9.12 Subscanning Unit (Cleaning the Glass Guide)
9.13 Subscanning Unit (Replacing the Shock Absorber-Attached
Center Guide Plate/Shock Absorber-Attached Guide Plate)
9.14 Subscanning Unit (Installing the Scanning Optics Unit)
9.15 Subscanning Unit (Installing the Light-Collecting Guide
Assemblies)
9.16 Installing the Side-Positioning Conveyor
9.17 Pushing In the Scanner Unit
C
009-058-00
10.20.2000 FM2732 (2)
CR-IR347 Service Manual
Replace
Shock absorber-
Clean
attached guide plates
1Y 3Y
Clean
1Y
Clean
1Y
Clean
1Y
Clean
1Y
Clean
1Y
Clean
1Y
Replace
Shock absorber-attached center guide
plate/shock absorber-attached guide plate
3Y
PM - 6
FR7H6188.EPS
PM - 6