Upper And Lower Cable Management Brackets; Blower Module - Cisco Router XR 12416 Installation Manual

Blower Module

Upper and Lower Cable Management Brackets

Caution
Blower Module
Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide
1-36
The Cisco XR 12416 and Cisco XR 12816 Router includes upper and lower cable
management brackets that work together with individual line card cable
management brackets to organize interface cables entering and exiting the router
(see Figure 1-1).
Network interface cables to the line cards are fed across the brackets, and then
through the openings to the individual line card cable management bracket. This
system keeps cables out of the way and free of sharp bends.
Excessive bending of interface cables can damage the cables.
The router has two blower modules to distribute air within the chassis. One blower
module is located above the upper card cage; the second blower module is located
below the lower card cage (see Figure 1-1).
Chapter 1 Product Overview
OL-17440-01