Transparency Specifications; Special Considerations When Printing Transparencies; Transparency Sizes - DEC 2100 Operator's Manual

5.3 Transparency Specifications
Table 5–3 and Table 5–4 contain information on the sizes and specifications
of transparencies that can be used with the DEClaser 2100 printer.
Table 5–3: Transparency Sizes
Transparency Size
A4
Letter
Table 5–4: Transparency Specifications
Category
Transparency weight
Thickness
Moisture content
Smoothness
Heat tolerance
Electrical resistance

5.3.1 Special Considerations When Printing Transparencies

Observe the following requirements when printing on transparencies:
• Transparencies are usually fed manually.
transparencies from a cassette, be sure they are high-quality
transparencies and meet the specifications listed in Table 5–4.
• Remove transparencies from the rear output tray as each one is printed
to prevent them from sticking to each other.
5–8 DEClaser 2100 Printer Operator's Guide
Dimensions
210 mm x 297 mm
8 ½" x 11"
Specification
2 2
60 g/ to 135 g/ basis weight
(16 lb. to 36 lb.)
0.075 mm to 0.115 mm
5% to 8%
100–300 Sheffield
200°C (392°F) for 0.1 second
11
1.0 x ohm-cm–2.0 x
10
2.0 x ohm-cm–2.0 x
12
ohm-cm (cubic content)
11
ohm-cm (surface)
If you are feeding