Transparencies; Special Considerations When Printing Transparencies; Transparency Sizes; Transparency Specifications - DEC 220240 Operator's Manual

5.3 Transparencies

Table 5–3 and Table 5–4 contain information on the sizes and specifications
of transparencies that can be used with the DEClaser 2200 plus printer.
Table 5–3: Transparency Sizes
Transparency Size
A4
Letter
Table 5–4: Transparency Specifications
Category
Transparency weight
Thickness
Heat tolerance

5.3.1 Special Considerations When Printing Transparencies

Observe the following requirements when printing on transparencies:
• Transparencies are usually fed manually.
transparencies from a cassette, be sure they are high-quality
transparencies and meet the specifications listed in Table 5–4.
• Remove transparencies from the rear output tray as each one is printed
to prevent them from sticking to each other.
• Use the rear output tray.
5–8 Operator's Guide
Dimensions
210 mm x 297 mm
8 ½ in. x 11 in.
Specification
2 2
135 g/m to 150 g/m basis weight
(16 lb. to 36 lb.)
0.095 mm to 0.115 mm
200°C (392°F) for 0.1 second
If you are feeding